Electric Fence System For 1/2 Dogs Pet Dog Containment Training Collar Shock HFH

Description

Description:
This fencing system is among the most reliable, cost-efficient pet containment systems available today.
A buried wire transmits a harmless radio signal.
When you dog approaches the boundary, the signal causes the dog's collar receiver to deliver a warning beep first.
If your dog continues closer to the boundary, the system will issue a mild shock.
If your dog continues further, the system will issue stronger shocks until your dog returns to within the boundary your have set up.
Your dog will naturally seek to avoid correction, and is content staying within established boundaries.
Product Feature:
For all dogs with update version ,and most reliable.
Pulsed Proportional Stimulus
- The closer your pet gets to the boundary, the more intense the shock.
Progressive Tone Stimulus
- A warning tone will be issued first, then a shock stimulus if your dog continues to move closer to the boundary.
Power Boost Switch
- Allows the width of the warning are to be adjusted
Speed Detect Anti-Run Through(Effective distance:5M)
- The faster your dog is moving, the quicker the higher level of intensity is issued
Audible Wire Break Alarm
- The system's control center has an audible alarm to alert you if it senses a break in the wire or if the boundary system is not functioning correctly
Visual Wire Break Alarm
- The system's control center will light alsoup if it senses a break in the wire
Quick Disconnet Terminals- quick and secure connection or disconnection of the wire to the control center
Low Battery Indicator
- When the light on the collar is green, it is working properly. Red means time to replace the battery.
The update version ,New waterproof funtion,most reliable.
Up to 5000 square meters range. Over 1.2acre.
Collar Max. Circumference: 58cm
Feature:
Cable length:114cm
Size of the collar:27-44cm
Diameter of the collar:12-18cm
Battery for receiver:6V 4LR44 Battery(2pcs)
Transmitter:Rechargeable
Input output voltage:110V-240
Range for controlling:5000m2
Waterproof Level:IP7
Point of this kit:Underground Design
Point2:Safe LED indicator light if underground wire been ruined
Point3:There is alarm before pet running crasy
A=Package Content:
1X Indoor Wall mounted transmitter.
1X Power plug
2X Adjustable receiver collars.
1X Battery for collar.
1X Boundary wire of 300 meters.
2X Extra metal contact points.
20X Training flags.
1X Test bulb.
1X Screws.
1X User’s manual in English.
B=Package Content:
1X Indoor Wall mounted transmitter.
1X Power plug
1X Adjustable receiver collars.
1X Battery for collar.
1X Boundary wire of 300 meters.
2X Extra metal contact points.
20X Training flags.
1X Test bulb.
1X Screws.
1X User’s manual in English.
C=Anti Bark Collar
The working principle of the product:
This product uses a vibration sensor for sensitivity distinction. When the barking reaches a certain frequency, it will trigger the sensor. This product will emit sound first, then vibration, then impact. The collar can be used to turn on or off the vibration or shock function. To determine if the dog will stop barking, use only the vibration function.
How to use it:
Charging the collar: To charge the device, plug in the black USB charging cable and connect it to a laptop or PC or a power source less than 1 ampere. The device can be fully charged within an hour and will
Work continuously for 14 days. When charging the device, the digital display will continue to flash until it is fully charged. The digital display will show 7 when the product is fully charged. Please unplug the USB plug charger before turning on the device.
Open-close device
To turn on the device, press the "Power" button for one second, and it will emit a beep when the digital display flashes green numbers, and then disappear. To turn off the device, press the "Power" button for 2-3 seconds and it will emit It beeps twice and turns off automatically.
Test Equipment
1. Turn on the power.
2. Adjust the sensitivity level to 7.
3. To test whether the vibration and shock functions are both effective, please adjust the vibration level to 3 and the shock level to 3.
4. Next, place the test bulb on the two gold terminals on the back.
5. While fixing the transparent test bulb in place, blow into the hole on the back
6. The device will beep first, then vibrate, and then the light bulb will go out. Light up orange. The instructions are now available.
Application:
Check the collar and adjust it to the correct length
●Avoid wearing collars on dogs for more than 12 hours a day.
●If possible, reposition the collar every 1 to 2 hours.
●Check the collar to prevent excessive pressure.
●Wash the contact parts of the dog’s neck and collar every week
Set up:
The digital display shows vibration, shock and sensitivity levels.
You can select the sensitivity button from 1-7 to adjust the sensitivity by pressing the button continuously. Level 1 is the least sensitive, level 7 is the most sensitive
You can choose to adjust the vibration from 0-7 by pressing the button continuously, the vibration button. Level 1 has the smallest vibration and level 7 has the largest vibration. When set to level 0, the product will not vibrate.
You can choose to adjust the vibration level from 0-7 by continuously pressing the shock button. Level 1 has the smallest impact and level 7 has the largest impact. When set to level 0, the product will not vibrate. "
Important Notice:
The anti-bark collar non-waterproof, please do not submerging the remote in water, it will cause damage.
Package included:
1 x Anti-bark Collar
1 x Usb Charge cable
1 x Adjustable belt
1x Static Test kit.