E6000 Jewelry & Bead 1oz w/tips Adhesive Permanent Glue Rhinestone Crystal Clear

Description

E-6000 1 oz 29.5 ml Tube of Industrial Strength Glue with tips Adhesive Permanent Dries Clear and is washable - Perfect for DIY projects, Crafts, Rhinestones, Fabric, Glass, Automotive, Repairs, Jewelry, Beads, Wood, Multi Purpose household and includes tips
Description
E6000 1oz tube of glue with tips - dries clear and is washable - permanent and good for all kinds of project
Jewelry & Bead
1 oz 28.5 ml Tube with 4 Precision Tips
E6000® Jewelry & Bead™ Glue
ALLOWS SMALL ADHESIVE DROPS FOR FINE, PRECISE, CONTROLLED AND NO-MESS APPLICATIONS.Precision tips make this perfect for securing knots and permanetly attaching most any type of stone, gem, crystal or bead to jewelry finds and base metal, silver, copper and gold jewelry pieces.Precision applications are now simple for many other non-craft projects too!
Features and Benefits:
• Precision tips included for precise applications
• Industrial strength formula
• Multi-surface — Polymer Clay, Metals, Wood, Resin Jewelry, Leather and much more!
• Clear
• Maximum flexibility
• Waterproof
A high-performance industrial adhesive that became a hit in the craft market with its superior performance, flexibility and versatility.
Typical Use:
E-6000® outperforms silicones, acrylics and rubber cements because it adheres to more surfaces with greater durability. E-6000® provides a superior bond on stubborn porous and non-porous substrates like metal, plastic, glass, concrete, rubber, as well as brick, tile, marble, ceramic, vinyl, fabric, canvas, leather and wood.
Just follow these step-by-step directions when using E-6000®:
Please read all directions before using. E-6000 should be used in a well-ventilated area.
Surface should be clean, dry, and free from dirt. For best results, roughen surface before use. Best when used between 70 \u00b0F (21 \u00b0C) and 85 \u00b0F (29 \u00b0C).
Always test a small area to ensure proper application technique and dry time.
Amazing E-6000 directly to each surface to be bonded or repaired. Allow E-6000 to partially cure, 5-10 minutes, before bringing surfaces together. E-6000 hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive-coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact.
For maximum strength, allow to dry for 48 hours. Cure time increases with lower temperatures and decreases with higher temperatures.
Keep threads at the neck of the tube free of E-6000 residue. To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
Clean uncured adhesive with small amounts of acetone or naphtha; the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping.
Store unused Amazing E-6000 at room temperature with cap tightened.
NOTE: E-6000 may damage finished surfaces. Avoid such contact until E-6000 is completely dry.
Information:
• Industrial-strength single component adhesive.
• Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and many more.
• Dries clear.
• Photograph safe.
• Safe for repeated washing and drying.
• Paintable
• Withstands heat up to 150 \u00b0F / 66 \u00b0C.
Uses:
• Decorate glass bottles with plastic, metal and wood.
• Affix beads to vases.
• Assemble silk or plastic floral arrangements.
• Decorate wood frames with fabric.
• Create unique jewelry with metal findings.
• Assemble wooden birdhouses.
• Repair wooden or ceramic planters.
• And much more!
FAQS
What types of jewelry and beads will E6000 Jewelry & Bead work on? 
Jewelry & Bead will permanently attach most any type of stone, gem, crystal or bead to findings and base metal, silver, copper and gold jewelry pieces. It also permanently bonds objects to polymer clay, metals, wood, resin jewelry, leather, and much more. 

What temperature range does E6000 Jewelry & Bead withstand? 
Product can be used between 50 and 90 °F (10 - 32 °C). Dry time decreases when used between 70 and 90 °F (21 - 32 °C). 

Will E6000® Jewelry & Bead crack or break under stress? 
No, Jewelry & Bead dries to a rubber-like consistency that is flexible and won't crack or break under stress. 

How long does E6000 Jewelry & Bead take to cure? 
Jewelry & Bead starts getting tacky in approximately 2 minutes and begins setting in approximately 10 minutes. A full cure takes between 24 and 72 hours. 

Remember, temperature and humidity will affect cure time. 

What is used to clean up uncured E6000Jewelry & Bead? 
Small amounts of acetone or citrus-based solvents for uncured Jewelry & Bead.
Please see www.eclecticproducts.com for all Safety Questions and Information.
Combined shipping is very simple to do.  Make all your purchases, but don’t pay for them until you are finished doing all your shopping.  It will look like you are paying shipping every time, but that will go away after you get your combined invoice.  Once you are finished, go ahead and make your payment and all the items should be listed together and shipping will be the combined price or free if the order qualifies. Items must be paid for at the same time to qualify for combined shipping.
Shipping costs are not refundable if items are paid for individually.
Thank you for looking and we appreciate your business! And as always, please let us know what we can do to make your experience in our store better. Visit My eBay Store
Add me to your Favorite Sellers